DT-V17G2

MENU

17 inch HD LCD Broadcast Production Monitor

DT-V17G2

The DT-V17G2 is a versatile LCD monitor suitable for field, studio and broadcast use. The monitor is fully capable of displaying 2048 x 1080/24p (DCI 2K) signal.


  • Pixel-by-pixel (1:1) display
  • Tiltable stand with 2-way installation capability
  • Color Temperature settings (9,300K, 6,500K, 5,600K or User mode)
  • IP modes: Normal, Field, and Cinema (24p)
  • High 1500:1 Contrast Ratio
  • Built-in Histogram, Waveform, Vector Scope, Zebra
  • Carrying handle
  • Full HD resolution: 1920 x 1080 pixels
  • Optimized I-P conversion
  • Built-in Audio Level Meter up to 16ch
  • Lissajous audio metering
  • 17-inch class (16.5-inch view-able) IPS panel with 16.7 million color reproduction
  • Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
  • Two 3G-SDI & Dual Link inputs
  • IMD (in monitor display)
  • 3 Gamma Preset Modes
  • Wide array of markers and indicators
Technical Specifications
Manuals
Technical Specifications
Panel Specifications
Panel size (diagonal in inch)
16.5
Panel resolution
1920 X 1080 Pixels
Panel Aspect Ratio
16 to 9
Panel Type LCD
Yes
Panel Modulation IPS
Yes
Back-light LED
Yes
Brightness in cd/m²
300
Panel Bit depth:
8
Image Processing Bit depth
10
Panel response times in ms
8 ms
Viewing angle H/V
H 178 / V 178
Contrast Ratio
1500:1
IN-OUT´s Connections VIDEO
Input HDSDI
Yes, 3G
Number of HDSDI Inputs
2
HDSDI DUAL LINK
Yes
Input HDMI
Yes
Number of HDMI Inputs
1
HDMI HDCP
Yes
Input YUV
Yes, 3 x BNC
Input Composite
Yes
Numbers of Composite Inputs
2
Loop out HDSDI
Yes, 2 with bridge function
Loop out Composite
Yes
IN-OUT connections AUDIO
Audio Line IN
Yes, 2 x RCA and 1 x 3.5mm mini jack
Audio Embedded Channel out
Yes, selectable
Speaker integrated
Yes, 2
Watts
2 X 1 Watts
IN-OUT Connections Controls
GPI IN
Yes, RJ45
RS485/422 IN
Yes, RJ45
RS485/422 Loop out
Yes
RS232 IN
Yes, 9 Pin Sub D
Service Port
Yes, internal
Supported Signal Formats
Note for SMPTE/ITU Definitions
SMPTE or ITU definitions have servile specification in-between, like SMPTE 274 for Interlace Frames rates for example, this is not reflecting here! Please ask for details Signal Spec´s and Frame-rate supports
HDSDI/SD Signal Formats SMPTE-424M
Yes
HDSDI/SD Signal Formats SMPTE-425M-A/B
Yes
HDSDI/SD Signal Formatss BTA S-004C
Yes
HDSDI/SD Signal Format SMPTE-292M
Yes
HDSDI/SD Signal Formats DUAL-LINK or 3G SMPTE-372M-2002
Yes
HDSDI/SD Signal Formats ITU-R BT656
Yes
SDI SIgnal Formats SMPTE-259M
Yes
Signal Format ITU BT601-7
Yes
Signal Format SMPTE-299M
Yes
Signal Format SMPTE-272M
Yes
HDMI Format 1080P plus
up to 1080P
Composite
Yes, PAL/NTSC
Dedicate Functions
SDI Timecode
Yes, LTC, VITC, and D-VITC
R/G/B/Mono
Yes
H/V delay
Yes, only with special upgrade
Field/Frame mode
Yes, Field 1 / Field 2 / Reverse only with special upgrade
Scan Modes
Progressive,/Field Cinema 3:2 pull down / 1:1
Safety area markers
Yes, 80% to 100%
Center Marker
Yes
Scale Markers
Yes, 4:3/16:9/14:9/13:9/2.35:1/1.85:1/1.75:11.66:1
Area Marker Visibility
OFF,Line,Half,Half+Line
Tally via GPI
Yes
Tally Multi-Color
Yes
Low Latency Mode
Yes
Screen saver
Yes
Environment Power Save function
Yes
TSL UMD/IMD Support via:
Yes, Serial RS485
Function Keys
2
Direct Input Channel buttons
Yes
Auto Aspect
Yes, Analogue and Digital sources
OPERATION KEY-LOCK
Yes
Operation LED Dimmer (Buttons)
Yes
Direct Brightness/Contrast/Color control
Yes
Measurement and indication Tools
Waveform
Yes
Waveform enlargement
Yes
Waveform subs
R/G/B, Y/PB/PR, and Y/CB/CR. peak brightness with Over-level function.
Vector-scope
Yes
Vector-scope enlargement
Yes
Vector-scope subs
video,component, SDI (SD/HD) input signals.
Histogram
Yes
Audio Level Meter
Yes
Audio Level Meter Channels
16
Audio Level Meter subs
Over Level Indication plus Lissajous Meter
Calibration and Color settings
Preset Color Temperature 9300K
Yes
Preset Color Temperature 6500K
Yes
Preset Color Temperature 5600K
Yes
Preset Color Temperature USER:
Yes
Manual calibration of Color Temperature (gain or/and cut-off)
Yes
External Auto-Calibration (Software Tool)
Yes
External Colormetrie Sensor needed
Yes, Minolta CA-210, X-Rite i1 Display 2, i1 Display 3/Pro (OEM version), Jeti Specbos (with FTDI driver v.2.8.24), Datacolor Spyder4
Calibration Hints:
Free Calibration Software in our Support area
Gamma Levels
2.2/ ,2.35,/2.45,/2.6
Adjustable Back-Light
Yes
Dedicate Timing Information
Lip-sync. Processing time:
less 1 Frame
MTBF Life-Times
MTBF Notes:
MTBF Data are based on theoretical Mathematics-calculations, the values therefore are just a guess of reference life time estimation.
MTBF Panel (Back-light) :
30000 hours
MTBF electrical:
0 hours
Power and Enviroment Spec´s
Power AC
Yes
Power DC
Yes, 12V-17V
DC Connector Type:
4 PIN XLR
Power consumption
0.3 Ampere /AC 5 A DC
Operation Temperature in Celsius
5C to 35C
Operation Humidity:(Non-Condensing)
20% to 80%
Storage Temperature in Celsius
-20C to 60C
Storage Humidity (Non-Condensing)
10% to 90%
Mechanical Informations
VESA Mount
Yes
VESA Format
100x100
VESA Screw Type in Metric
M4x4mm
Rack-mount into 19" Format
Yes, optional
Dimensions W x H x D in mm
W:430mm / H:309mm / D:102mm
Weight (without stand) in Kg:
5.8Kg
Weight in Kg:
8.2Kg
Include Package
AC Power cord
Yes
Others
CD Rom detail instructions , Power cord Holder, srews
Instruction Doc:
Yes
General Editing Note
General Note
Simulated pictures.The values for weight and dimensions are approximate .E.&O.E. Design and specifications subject to change without notice.
Manuals
INSTRUCTIONS English 2016 17.40MB View Download
Safety Precautions English, French, Spanish, German, Italian, Russian 2016 0.70MB View Download
INSTRUCTIONS French 2016 7.07MB View Download
INSTRUCTIONS German 2016 7.16MB View Download
INSTRUCTIONS Italian 2016 7.17MB View Download
INSTRUCTIONS Russian 2016 7.24MB View Download
INSTRUCTIONS Spanish 2016 7.15MB View Download